How to Keep the Right Documents After a Legionella Assessment
Last Updated: November 10, 2026
Quick Summary
Keep your legionella assessment documents in three tiers: the current assessment report and significant findings, remedial and control records such as temperature logs and flushing records, and tenant communications. Store them in a named digital folder per property with a backup, so a complete file can be produced at short notice.
- Keep the full assessment report, not just the summary page, and file it with the property and water-system description.
- Record four things for each remedial task: what was done, the date, who did it and the result.
- Keep the full run of records for ongoing control measures, not just the most recent entry.
- Match every significant finding to a control record; a finding with no matching record is a gap.
- Log any change to the property or water system and reassess if the change is material.
Table of Contents
- What You Should Have in Your Legionella Assessment Documents
- Your Landlord Legionella Risk Assessment Report: What It Must Record
- Keeping Legionella Remedial Action Records That Prove the Work Was Done
- Building Your Landlord Water System Logbook
- How Long to Keep Legionella Records and Where to Store Them
- Records for Different Property and Water-System Scenarios
- A Simple Review and Update Workflow for Your Records
- Step 1: Confirm the live assessment and its review date
- Step 2: Match every significant finding to a control record
- Step 3: Check the logbook for gaps in the run of records
- Step 4: Confirm tenant advice is current and recorded
- Step 5: Log any change to the property or water system
- Step 6: Decide whether to update or reassess
- Worked example: what a complete record entry looks like
- Triggers that should bring the review forward
- Booking Your Legionella Risk Assessment and Records Review
- Frequently Asked Questions
What You Should Have in Your Legionella Assessment Documents
If you rent out property, the paperwork after a legionella assessment matters as much as the visit itself.
Legionella is a type of bacteria that can grow in water systems and cause Legionnaires’ disease, a serious lung infection.
The law here is straightforward in principle. Act 1974 and the Control of Substances Hazardous to Health Regulations 2002, you must assess and control risks from Legionella (Legionnaires’ disease – what you must do). The Health and Safety Executive’s approved code of practice, Legionnaires’ disease: The control of Legionella bacteria in water systems (ACOP L8), sets out what a suitable assessment looks like.
So what should be in your file? Start with two core items.
The assessment report itself
This is the document produced by the competent person who surveyed the property. It should identify the water system, list the risk points, and set out what needs doing. Keep the full report, not just the summary page. If a tenant or an inspector asks why a control measure exists, the report is your answer.
The property and water-system description
Your file should record the property address, the type of water system, the number of outlets, and whether there is a hot water storage cylinder or a combination boiler.

Your Landlord Legionella Risk Assessment Report: What It Must Record
A landlord legionella risk assessment report is only useful if it records specific findings. For the full landlord guide to legionella risk assessment, including your underlying legal duties, see our dedicated resource.
- Assessment date and the name of the competent person
- Property address and a description of the water system
- Hazard identification: outlets, dead legs, little-used taps, showers, and any cold water tank
If any of these are missing, ask the assessor to correct the report. A thin report is hard to defend later.
Keeping Legionella Remedial Action Records That Prove the Work Was Done
Legionella remedial action records are the evidence that you acted on the findings. An assessment that recommends a fix, with no record of the fix being completed, leaves you exposed.
For each remedial task, record four things:
- What was done, in plain terms
- The date it was completed
- Who did it
- The result, such as a temperature reading or a photo of the cleaned outlet
A common mistake is recording the task but not the outcome. Where a temperature check forms part of the remedy, log the reading in line with the HSE guidance on Legionella control (HSG274) so your numbers mean something. Our legionella temperature monitoring guide explains the HSE benchmarks and precise logging standards.
Building Your Landlord Water System Logbook
A landlord water system logbook is the running record of day-to-day control, a diary for the water system, not a one-off document.
Your logbook should hold:
- Temperature check results, with dates and the outlet tested
- Flushing records for little-used outlets
- Cleaning and disinfection dates for showers and tanks
Keep it simple. For a deeper look at how a logbook review is carried out, see our guide to a legionella logbook compliance review for sports clubs.
How Long to Keep Legionella Records and Where to Store Them
Retention is where many landlords lose confidence, because the law does not set a single blanket period for every Legionella record. The answer depends on what the record is for and which duty it supports, so separate records into three tiers and apply a retention period to each.
Tier 1: The assessment report and significant findings
Keep the current assessment report for as long as it remains the live assessment, and keep superseded reports for as long as you may need to show the version in force at the time of any incident. A future buyer, managing agent or inspector may want to see that version.
Tier 2: Remedial and control records
Remedial action records, temperature logs, flushing records and cleaning certificates should be kept for as long as they may be needed to show the control measures in the assessment were actually carried out. Where a control measure is ongoing, for example, monthly outlet flushing, keep the full run of records, not just the most recent entry, so the pattern is visible.
Tier 3: Tenant communications and transient records
Copies of tenant advice sheets, reports of water issues from tenants and notes of actions taken should be kept for as long as they remain relevant, including where they relate to a remedial task. If a tenant report led to a repair or a change to the assessment, link the two records so the trail is unbroken.
Where to store records so they can be produced quickly
The test of storage is not tidiness but speed of retrieval.
- Keep a named digital folder per property, with subfolders for the assessment, remedial records, logbook entries and tenant advice.
- Back up digital files to a second location, so a lost laptop or a failed drive does not lose your evidence.
- Store paper originals somewhere dry and locked, and keep the current assessment and most recent logbook entries accessible without a search.
Watch out: storing records only on a personal phone or in an email inbox feels convenient but fails the retrieval test, if you cannot hand over a complete file within minutes, treat the storage method as inadequate.
If you want the wider picture of how retention fits with your other water safety duties, see our guide to landlord responsibilities for water safety.
Records for Different Property and Water-System Scenarios
The document set shifts with the property. Use this table as a quick check.
| Property scenario | Extra records to keep | Why it matters |
|---|---|---|
| Flat with combination boiler | Outlet list, flushing log | Fewer stored-water risks, but little-used taps still need flushing |
| House with hot water cylinder | Cylinder temperature checks, annual service record | Stored hot water needs consistent temperature control |
| Property empty for weeks | Prolonged vacancy log, flush dates on return | Stagnant water raises bacterial growth risk |
| Shared building with a managing agent | Agent’s assessment report, your copy of tenant advice | Duties split, so both parties need the paper trail |
| Multiple properties | One folder per property, master index | Keeps evidence separate and easy to find |
A common mistake is treating a prolonged vacancy like any other period. Water sitting in pipes for weeks is a known risk factor, so log the vacancy and the flush when the property is used again.
A Simple Review and Update Workflow for Your Records
Records go stale quietly. A file that was complete at the time of the assessment can become misleading within a year if the property changes and the paperwork does not. The same trigger-based approach applies to other property records, with Jmings Electrical helping keep electrical safety paperwork aligned with changes in occupancy or use.
Step 1: Confirm the live assessment and its review date
Find the most recent assessment report and check the review date recorded on it. Diarise that date, and note the triggers listed in the report that would bring the review forward. If the review date has already passed, treat that as a trigger in its own right.
Step 2: Match every significant finding to a control record
Re-read the significant findings in the report and, for each one, confirm there is a matching record showing the control measure was carried out. A finding with no matching record is a gap, even if you believe the work was done. This cross-check is the single most useful review activity, because it catches the common pattern of a task being completed but not logged.
Step 3: Check the logbook for gaps in the run of records
Look for missing entries in temperature checks, flushing and cleaning. A single missing month is easy to explain; a pattern of gaps suggests the control regime has slipped. Note the gaps and the reason, rather than backfilling entries you cannot evidence.
Step 4: Confirm tenant advice is current and recorded
Check that the tenant advice sheet was issued, that you have a record of when and how it was sent, and that the advice still matches the property. If a new tenant has moved in, issue the advice again and record it.
Step 5: Log any change to the property or water system
Note any change since the last review, a new boiler, an added shower, a removed tank, a change in occupancy or a prolonged vacancy. Each can alter the risk profile and may require a new assessment rather than a simple update.
Step 6: Decide whether to update or reassess
If the changes are minor and the control measures still fit, update the records and note the review. If the water system has changed materially, or the review date has passed, book a new assessment and file the new report alongside the superseded one.
Worked example: what a complete record entry looks like
A useful test is whether an entry answers four questions: what was done, when, by whom, and with what result. A weak entry reads “shower head cleaned”. A complete entry reads: “Shower head descaled and disinfected, outlet flushed for five minutes, hot water temperature at the tap recorded, date and initials logged.” The second version tells an inspector, a tenant or a future owner the full story without follow-up questions.
Triggers that should bring the review forward
- A change of tenant or a prolonged vacancy
- Building work, plumbing changes or a new water system component
- A case of Legionnaires’ disease linked to the property
If any of these occur, do not wait for the review date. Update the records, and reassess if the change is material. A short review routine, run against these triggers, keeps your file current without turning record-keeping into a burden.
Booking Your Legionella Risk Assessment and Records Review
A tidy file starts with a proper assessment. The Testing Lab carries out legionella risk assessments, with UKAS accreditation (No. 7758) and Legionella Control Association registration.
If your current paperwork is patchy, we can review what you hold and tell you what is missing. To arrange an assessment and records review, see our legionella risk assessment services and get a clear picture of where you stand.
The real risk is not a single missing document; it is a file that cannot show what was done and when.
Frequently Asked Questions
What should a landlord receive after a legionella risk assessment?
You should receive a written assessment report that names the property and assessment date, describes the water system and its outlets, lists the significant findings and risk factors, and sets out recommended control measures with a review date. Ask for the assessor’s competence details too, such as Legionella Control Association registration or UKAS accreditation. Keep the report with your other legionella assessment documents so you can show what was found and what you did about it.
How long should a landlord keep legionella records?
There is no single statutory retention period for every record, so the practical approach is to keep assessment reports and remedial action records for as long as you own or manage the property, plus a further period after you sell or hand it back. Keep monitoring records such as temperature checks and flushing for as long as they may be needed to show ongoing control, and longer where your managing agent or contract requires it. When in doubt, retain rather than destroy.
Does a landlord need to give tenants a copy of the legionella assessment?
Tenants do not automatically receive the full report, but giving them clear information about legionella and the controls in their home is good practice and supports your records. A short tenant advice sheet covering how to avoid stagnant water, keeping outlets clean and reporting problems is usually enough. Keep evidence that you issued it, such as a dated copy or a signed acknowledgement, alongside your other documents.
Should landlords keep records of remedial work after an assessment?
Yes. Legionella remedial action records are what show an inspector or auditor that recommended controls were actually carried out. Keep the original recommendation, the date the work was completed, who did it, what was done, and any follow-up check or photograph. If a remedy is still outstanding, record the reason and your target date so the file shows a live plan rather than a gap.

