Skip to main content Scroll Top
TTL PLC, National Control Centre. DN6 7HH

Geotechnical Testing Prices

Lab test prices from our UKAS accredited geotechnical laboratory in Doncaster

Geotechnical Testing Costs Across England, Scotland & Wales

Laboratory testing at our UKAS accredited laboratory in Doncaster costs £6 to £425 per test, excluding VAT, with no minimum charge, for samples sent to us by courier, haulier or your site team. Simple classification tests such as moisture content are at the lower end, effective stress triaxial tests at the upper end. If you need us to collect samples, we pick them up or arrange a courier, quoted by the number of samples and the distance. Prices checked November 2026. Send us your test schedule and we will give you an exact quote.

Geotechnical tests we price

Test groupTypical testsStandards (UKAS accredited)
ClassificationMoisture content, Atterberg limits (liquid and plastic limits), particle size distribution, bulk and dry density, particle density, linear shrinkage, saturated moisture content of chalk, electrical resistivityBS EN ISO 17892-1, BS EN ISO 17892-2, BS EN ISO 17892-3, BS EN ISO 17892-4, BS EN ISO 17892-12, BS 1377-2, BS 1377-3
CompactionDry density and moisture content (2.5 kg, 4.5 kg and vibrating rammer), moisture condition value, CBR, chalk crushing value, maximum and minimum densityBS 1377-2
Consolidation, permeability and durabilityOne-dimensional consolidation (oedometer), swelling and settlement, triaxial consolidation and permeability, dispersibilityBS 1377-2, BS 1377-5, BS 1377-6, BS EN ISO 17892-5, BS EN ISO 17892-11
Shear strength (total stress)Direct shear box, unconfined compression, undrained triaxial, hand shear vaneBS EN ISO 17892-7, BS EN ISO 17892-8, BS EN ISO 17892-10, BS 1377-7
Shear strength (effective stress)Consolidated undrained (CU) and drained (CD) triaxial tests with pore pressure or volume changeBS EN ISO 17892-9, BS 1377-8
Rock and aggregateWater content, porosity and density, compressive strength, point load, constituents of recycled aggregateISRM Suggested Methods, BS EN 933-1, BS EN 933-11, BS EN 1097-5

BS, BS EN and BS EN ISO numbers are the British, European and international standards each test follows (ISRM for rock): engineers often specify tests by these numbers. Click a test name to read how the test works.

Prices range from £6 to £425 per laboratory test, excluding VAT, with no minimum charge. Sample collection is quoted separately. Ask for more details, or send us your test schedule for an exact quote.

What changes the price

  • The number of tests and samples in your schedule.

  • How long a test runs: some tests, such as consolidation and triaxial tests, run for several days.

  • Sample preparation, such as remoulding or recompacting specimens.

  • Sample disposal.

Contact our geotechnical testing team

To discuss geotechnical laboratory testing, or to request a quotation for your test schedule, please contact our experienced and dedicated team:

Tel: 0800 177 7264
Email: [email protected]

Or please complete our online call back form by clicking on the “Call Me” button, and we’ll respond promptly.

UKAS accredited laboratory

Our Doncaster laboratory is accredited by UKAS to ISO/IEC 17025 as testing laboratory 7758. The accreditation covers soils for civil engineering (BS 1377), laboratory testing of soil (BS EN ISO 17892), rock and aggregates, as well as our asbestos testing. You can see the full schedule on our accreditations page.

Tests on request

We also arrange specialist tests through partner laboratories, priced on request: permeability by constant head, Los Angeles coefficient, slake durability, magnesium sulfate soundness, polished stone value, aggregate abrasion value, micro-Deval coefficient, Cerchar abrasivity, deformability in uniaxial compression, indirect tensile strength (Brazilian test), large shear box and ring shear tests, laboratory vane, frost heave, methylene blue, pinhole dispersibility and redox potential.

Frequently asked questions about geotechnical test prices

  • How much does geotechnical testing cost?
    Laboratory tests range from £6 to £425 per test, excluding VAT, depending on the test and how long it runs. There is no minimum charge. Sample collection is quoted separately. Ask for more details, or send us your test schedule for an exact quote.

  • How much does pre-construction soil testing cost?
    The laboratory tests are £6 to £425 per test, excluding VAT. We test the samples in our laboratory. The site investigation itself, with trial pits or boreholes and the report, is arranged by your ground investigation contractor or engineer, who can send the samples to us.

  • Are your geotechnical tests UKAS accredited?
    Yes. Our Doncaster laboratory is UKAS accredited to ISO/IEC 17025 (testing laboratory 7758) for a wide range of soil, rock and aggregate tests, including BS 1377 and BS EN ISO 17892 methods. The table shows the accredited standards in each group, and the full schedule is on our accreditations page.

  • How long do the tests take?
    Simple classification tests are the quickest. Some tests run for a set period: one-dimensional consolidation 5 days, swelling tests 2 days, triaxial consolidation and permeability 4 days, and effective stress triaxial tests up to 4 days per specimen. Tell us your deadline when you ask for a quote.

  • Does the price include collecting the samples?
    No. These are laboratory prices for samples sent to us. For sample collection we pick the samples up or arrange a courier, quoted by the number of samples and the distance. It is quoted with your test schedule.

  • Do your prices include VAT?
    No. Prices exclude VAT, which is added where it applies. There is no minimum charge.

  • Is there a charge for disposing of samples?
    Yes, disposal is charged per sample, whether it is tested or not. Your quote shows it.

Our Testing Services

Asbestos Testing & Analysis
UKAS accredited for bulk materials, soils, and air.
Asbestos Consultancy
Expert support for CAR 2012 compliance, asbestos management and project oversight.
Legionella
LCA registered risk assessments, testing, and remedial works.
Geotechnical Laboratory Testing
UKAS accredited soil and material testing.
Water Management
Monitoring and trend data to optimise treatment and reduce risk.
Radon Testing
Externally accredited testing for waste and radon safety.
RAAC Testing
Identify and manage RAAC risks in buildings.
WAC Testing
Soil and waste samples tested for accurate, compliant landfill classification.
WM3 Testing
Testing and reporting to support WM3 waste classification and compliant disposal.
Mundic Block Testing
Specialist testing for concrete degradation.
Effluent Discharge Permit Monitoring
Effluent sampling, laboratory analysis and clear compliance reporting.
PAS 109 Gypsum Testing
Testing recycled gypsum from waste plasterboard, with clear reporting from our Doncaster lab.
XRD Analysis
Non-destructive X-Ray diffraction to identify phases and characterise crystalline materials.
XRF Analysis
Fast, non-destructive elemental analysis for materials and products.
BS 1881-124 Hardened Concrete Testing
Hardened concrete analysis for mix constituents, durability indicators and reporting.
BS 3882 Topsoil Testing
Topsoil testing for BS 3882:2015 classification, quality and suitability.
Coal Tar Testing
Testing reclaimed asphalt for coal tar and PAHs to support classification and compliant management.
HMRC LOI Fines Testing
HMRC-compliant LOI testing for waste fines to support landfill tax classification.
Lead Paint Testing
Laboratory testing of paint samples to detect lead and support safe project planning.
Call 0800 177 7264Instant Quote